What Role Does The Fascia Play In A House|3 Essential Needs

So you are involved in the matters of home construction and would hence want to gain deeper insight into what role doesbthe fascia playb in a house, right? May we first and foremost congratulate you on arriving at just the right page! Here, we are going to belabor one part of your typical home.

The fascia, it is! But just what is the fascia? Where exactly is it located in the typical home and what role(s) does it play? We urge you now to take your time to read through the explanations that follow to gain deeper insight into the matter.

What is fascia?

A fascia is a long narrow board that runs along the lower edge of the roof. It may exist on its own or as a part and parcel of the cornice. Most of the time, it is clearly visible to an observer and may hence be used to serve the role of decorating the outer part of your home.

What role does the fascia play in a house?

In your typical home, a fascia may serve the following roles or ends:

Support to the Gutter

The fascia confers exceptional support to the gutter system of your typical home. It is strong and stable enough to allow for the smooth attachment of the gutter to the home. Its strength and exceptional longevity is the primary reason why this is the case.

Aesthetics and Décor

As hinted above, the fascia may also serve to enhance the décor and the aesthetics of the places where you place the same. That is only achievable if the fascia itself is either colorful or adorned with many other decorative gears that the ordinary boards of home parts lack.

Attaching the Downspout

As a last role or consideration, the fascia may also be used to attach to the downspout. Like the case of the gutter above, the fascia yet again provides and the support that the downspout requires to stand taller and exceptionally supported for the purpose of serving to channel the flow of the rainwater down the drains.

Also Read : How To Clean Gutter Downsprout

Benefit of using fascia

We now take our time to examine some of the fringe benefits that the fascia brings along:

Blocks Rainwater from Intruding into the Attic

For one, the fascia blocks all the rainwater from intruding the attic. That stems from the fact that it places a barrier between the area that channels out the rainwater and the entrance to the attic. Thus, by installing it firmly in place, you get to prolong the life of your roofing materials and the attic.

Secures the Gutters firmly in place

Perhaps its most outstanding role is that it works extra hard to secure the gutters firmly in their places. This is a role it does by providing the base upon which the gutters may be fixed and made ready for your use. In doing so, it facilitates the smooth flow and discharge of the water to the drains.

Suppresses Moisture Buildup and the subsequent Damages

By preventing the penetration of the water to the roofs and the attic regions of the upper parts of the homes, the fascia also suppresses the buildup of the moisture and the damages that ordinarily come along. In this way, it extends the lifespan of the home as a whole.

Prevents the Growth of the Mold

Closely related to the above is the fact that it prevents the growth of the mold. This arises as a byproduct of the suppression of the buildup of moisture. Molds and the mildew love damp and humid areas which the fascia works extra hard to prevent from arising.

Provides firm support to the Shingles

As a last major benefit, the fascia board also confers firm support to the shingles. You will trait exceptionally handy when you have a home that is located in areas that are naturally susceptible to environmental damages such as strong winds and hurricanes.

Types of fascia

We now get to the types of house fascia by the raw materials:

Vinyl Fascia

This perhaps is the most common kind of material in the sense of being widely accepted across many municipalities and building codes. Also, it has the added advantage of being easier to craft not to mention the cheap price with which it comes about. Find it suited for your ordinary homes.

Concrete Fascia

If you are putting up a building that is strong and is supposed to endure the test of time, the material you may have to use ought to be concrete. Concrete lasts longer and is also more resilient to the common spates of damages that may be generally leveled against it.

Aluminum Fascia

An Aluminum fascia is one that is to be used for homes that are temporal or used to house the animals rather than the humans. The material is smaller, shorter, and easier to work compared to concrete and the other major kinds of materials. It also has the added advantage of being cheaper to accrue.

Wood Fascia

Wood is a material that is readily available and easier to work with. It mainly the typical do-it-yourselfer or someone who prefers to work the roof on his own. Most of the time, this material is largely employed in places or areas that are informal in nature.

Composite Fascia Boards

The composite fascia is manufactured using a combination of materials and substances. Top of these is the plastic, sawdust, and wood chips. Thanks to this combination of materials, the boards are stronger and more inclined to stand taller to the risks of warping and damages that come by ordinarily.

How To Install Gutters Without Fascia

How To Install Gutters Without Fascia

We have already explained time and again that the fascia plays the role of supporting the gutters. However, this may not always be the case. It is indeed possible for you to install the gutters without necessarily incorporating the fascia. Follow the steps below to accomplish that:

# Gather the necessary supplies

Start out the exercise by gathering the necessary supplies. Among these are the protective gears, straps, brackets, hammers, pliers, wrenches, and screws. You will need these items to fasten the gutters onto the roof and also protect your body from the hurts and injuries that ordinarily come along.

# Attach the gutter brackets

In this second stage, you need to attach the gutter brackets to the roof’s eaves. It is the brackets that shall act to hold the gutter firmly in place for the sake of added support for you. Be sure to screw the brackets firmly onto the system to prevent any likelihood of the system fidgeting or getting blown away.

# Fit the straps

Now fit the straps to the gutter hanger. It is the straps that act as the slings that subsequently hold the gutters firmly in place. After fitting the straps to the gutter hanger, attach the same directly to your roof. In the course of doing that, you will gain some strong and stable support.

# Install the gutters

After concluding the steps above, you now have to install the gutters to the entire system. Stash the gutters in such a way as to line up with the installation items and the configuration as a whole. Test the system to ensure thorough and flawless fitting outcomes.

How to remove and install fascia boards on a house without disturbing the roof

In most cases when removing or installing the fascia boards on the home, it is not uncommon for you to disturb the roofs. That is not an eventuality that you want to happen to you at all as it may pose some stray damages to the roof as a whole.

We now want to belabor the steps to follow to do so without necessarily posing unnecessary disturbances to the roofs. The steps below shall greatly help with this:

  • Cut a few rafters from one end of the fascia using a long blade
  • Run a screw in this area to hold every piece of the items firmly in place
  • Place a second screw after which you are to cut the fasteners on that end
  • Remove those screws by use of a ladder or a helper nearby
  • Maintain some calm all along with the processes above

How to install fascia at the peak

To install the fascia at the peak, follow the procedures below:

  • Align the end of the fascia board and make the same level
  • Nail and set up the whole length of the surface through to the gable peak
  • Slide the panels into the channels to secure the edge of the fascia board
  • Follow it up by nailing the same for stronger attachments
  • Lay some final touches and test the system for added strength

Who repairs soffit and fascia?

Just about any professional who is trained and certified for the task of installation and building can do that. These include qualified carpenters, handyman, and roofer, to name but a few! At all times, you must be certain that the professional has the education and the professional certification necessary for the accomplishment of the job.

Conclusion

We wrap up our look into the fascia there. With the kind of in-depth support we have provided, we are now truly confident that you have the preparedness you need to appreciate the items better and also make a more informed installation decision. Is it not wise of you to set out for an installation right away?